Table of Contents
Advertisement
3B-14 MANUAL RACK AND PINION
STEERING PINION
REMOVAL
1) Remove rack plunger as shown in STEERING RACK
PLUNGER.
2) Remove bearing plug with special tool.
Special tool
(A) : 09944-26011
3) Tap on position as shown with plastic hammer (2) to sepa-
rate pinion assembly (1) from housing, and remove pinion
assembly.
4) Remove oil seal (2) with special tool from pinion bearing plug
(1).
Special tool
(B) : 09913-50121
INSPECTION
• Inspect pinion teeth surface (3) for wear or damage.
• Inspect oil seal (1) for damage.
• Replace any part found defective.
• Check rotation condition of bearing and inspect for wear.
If found defective, replace.
2. Case seal
Advertisement
Table of Contents
