3C-4 STEERING WHEEL AND COLUMN
HANDLING AND STORAGE
For handling and storage, refer to "HANDLING AND STORAGE" under "SERVICE PRECAUTIONS" in Section
10B.
DISPOSAL
For disposal, refer to "DISPOSAL" under "SERVICE PRECAUTIONS" in Section 10B.
DRIVER AIR BAG (INFLATOR) MODULE
WARNING:
When handling an air bag (inflator) module, be sure to
read "SERVICE PRECAUTIONS" in Section 10B and
observe each instruction. Failure to follow them could
cause a damage to the air bag (inflator) module or result
in personal injury.
REMOVAL
1) Disconnect negative cable at battery.
2) Disable air bag system. Refer to "DISABLING AIR BAG
SYSTEM" under "SERVICE PRECAUTIONS" in Section
10B.
3) Loosen 2 bolts (1) mounting driver air bag (inflator) module
on its both side.
4) Remove driver air bag (inflator) module (3) from steering
wheel.
5) Disconnect yellow connector (1) of driver air bag (inflator)
module and horn connector (2) in order a) – d) shown in fig-
ure.