Table of Contents
Advertisement
• Timing chain cover (1) and cylinder head (2) matching sur-
face as shown.
"A" : Sealant 99000-31150
3) Install cylinder head cover to cylinder head.
NOTE:
When installing cylinder head cover, use care so that cyl-
inder head cover gasket or spark plug hole gaskets will
not get out of place or fall off.
4) Tighten bolts in such order as indicated in figure a little at a
time till they are tightened to specified torque.
Tightening torque
Cylinder head cover bolts (a) : 8 N·m (0.8 kg-m, 6.0 lb-ft)
5) Connect PCV hose (2) to PCV valve (1).
6) Install oil level gauge (3).
7) Install ignition coil assemblies with high-tension cord.
8) Connect ignition coil couplers and clamp harness securely.
9) Install cylinder head upper cover.
10) Install air cleaner assembly, resonator and hoses referring to
"AIR CLEANER ASSEMBLY AND RESONATOR".
11) Connect negative cable at battery.
ENGINE MECHANICAL (M13 ENGINE) 6A1-15
Advertisement
Table of Contents
