Table of Contents
Advertisement
7F-14 REAR DIFFERENTIAL
Differential Carrier
A: Pinion dummy height
B: Axle dummy radius
A+B: Mounting dummy size 68.00mm/2.67716 in.
C: Measured dimension
Special tool
(A) : 09922-76120
(B) : 09922-76250
(C) : 09922-76140
(D) : 09922-76430
(E) : 09922-76330
(F) : 09922-76150
(G) : 09922-76350
D: Drive bevel pinion mounting distance 68.00mm/2.67716 in.
E: Shim size for mounting distance adjustment (E = C)
1. Drive bevel gear
2. Front bearing
1) Set special tools and make drive bevel pinion mounting
dummy.
Special tool
(A) : 09922-76120
(B) : 09922-76250
2) Install dial gauge (1) to mounting dummy as shown in figure.
Special tool set distance
"a" : 25.0 mm (0.984 in.)
"b" : 0 mm (0.000 in.)
3. Differential carrier
4. Rear bearing
5. Spacer
6. Drive bevel pinion
Advertisement
Table of Contents
