Suzuki Ignis Service Manual page 118

3-4 STEERING, SUSPENSION, WHEELS AND TIRES
Condition
Wander or Poor
Steering Stability
Erratic Steering When
Braking
Low or Uneven Trim
Height
NOTE:
See NOTE *1.
Ride Too Soft
Suspension Bottoms
Body Leans or Sways
in Corners
Cupped Tires
Possible Cause
Mismatched or uneven tires
Loosen ball joints and tie rod ends
Faulty struts or mountings
Loose stabilizer bar
Broken or sagging springs
Rack and pinion adjustment
Disturbed front end alignment
Worn wheel bearings
Broken or sagging springs
Wheel tires are inflated unequally
Disturbed front end alignment
Brakes not working in unison
Leaking wheel cylinder or caliper
Warped discs
Badly worn brake linings
Drum is out of round in some brakes
Defective wheel cylinders
Broken or sagging springs
Over loaded
Incorrect springs
Faulty struts (shock absorber)
Overloaded
Faulty struts (shock absorber)
Incorrect, broken or sagging springs
Loose stabilizer bar
Faulty struts (shock absorbers) or mountings
Broken or sagging springs
Overloaded
Front struts defective
Worn wheel bearings
Excessive tire or wheel run-out
Worn ball joints
Tire out of balance
Correction
Replace or inflate tires to proper
pressure.
Replace suspension arm or tie rod
end.
Replace strut or repair mounting.
Tighten or replace stabilizer bar or
bush.
Replace spring.
Check and adjust rack and pinion
torque.
Check and adjust front end align-
ment.
Replace.
Replace coil spring.
Inflate tires to proper pressure.
Check and adjust front end align-
ment.
Check and adjustment brake sys-
tem.
Repair or replace wheel cylinder or
caliper.
Replace brake disc.
Replace brake shoe lining.
Replace brake drum.
Replace or repair wheel cylinder.
Replace.
Check loading.
Replace.
Replace strut.
Check loading.
Replace strut.
Replace.
Tighten stabilizer bar bolts or nuts,
or replace bushes.
Replace strut or tighten mounting.
Replace.
Check loading.
Replace.
Replace.
Replace tire or wheel disc.
Replace front suspension arm.
Adjust tire balance.