Clutch Discs, Plates And Flange; Direct Clutch Return Spring Seat - Suzuki Ignis Service Manual

4) Remove direct clutch balancer (1) and direct clutch return
spring seat (2).
5) Remove direct clutch piston (3).
Blow compressed air through input shaft oil hole to remove
piston. If piston does not pop out, take it out with long nose
pliers.
6) Remove D-ring (4) from direct clutch No.1 drum (5).
INSPECTION

Clutch Discs, Plates and Flange

Check that sliding surfaces of discs, plates and flanges are not
worn or burnt. If necessary, replace.
NOTE:
• If disc lining is exfoliated or discolored, replace all
discs.
• Before assembling new discs, soak them in A/T fluid
for at least two hours.

Direct Clutch Return Spring Seat

Measure height of direct clutch return spring.
Height of direct clutch return spring
: 16.3 mm (0.642 in.)
.
NOTE:
• Do not apply excessive force when measuring spring
height.
• Perform measurement at several points.
AUTOMATIC TRANSMISSION (4 A/T) 7B-101