Table of Contents
Advertisement
5) Remove contact coil and combination switch assembly
screws (1) and disconnect connectors (2) from combination
switch (3).
6) Disconnect horn connector (1) from instrument panel har-
ness.
7) Remove contact coil and combination switch assembly from
steering column.
INSPECTION
Check contact coil harness (1) for any signs of scorching, melting
or other damage.
If it is damaged, replace.
INSTALLATION
1) Check to make sure that vehicle's front tires are set at
straight-ahead position and then ignition switch is at "LOCK"
position.
2) Connect all connectors disconnected in REMOVAL.
STEERING WHEEL AND COLUMN 3C-9
Advertisement
Table of Contents
