Table of Contents
Advertisement
4A-2 FRONT DRIVE SHAFT
COMPONENT
A constant velocity ball joint is used on the wheel side of front drive shaft. For right side drive shaft of 2WD vehi-
cle, a constant velocity tripod joint on the differential side. For left side drive shaft of every type vehicles and
right side drive shaft of 4WD vehicle, a constant velocity double offset joint is used on the differential or transfer
side. The drive shaft can slide through the tripod joint or the double offset joint in the extension/contraction direc-
tion.
DIAGNOSIS TABLE
Condition
Abnormal Noise
GENERAL DESCRIPTION
DIAGNOSIS
Possible Cause
• Worn or breakage drive shaft joint
• Worn or breakage center bearing
DRIVE SHAFT BOOT CHECK
Inspect drive shaft boot for tear.
If even a small tear is noted, replace with new one.
Correction
Replace.
Replace.
Advertisement
Table of Contents
