Table of Contents
Advertisement
1
REMOVAL
WARNING:
Never rest a steering column assembly on the steering
wheel with the air bag (inflator) module face down and
column vertical. Otherwise, personal injury may result.
1) Disconnect negative cable at battery.
2) Disable air bag system. Refer to "DISABLING AIR BAG
SYSTEM" under "SERVICE PRECAUTIONS" in Section
10B.
3) If it is necessary to remove steering wheel and contact coil
and combination switch assembly, remove them, referring to
"STEERING WHEEL" and "CONTACT COIL AND COMBI-
NATION SWITCH ASSEMBLY".
If it is not necessary to remove steering wheel and contact
coil and combination switch assembly, perform the following
procedure.
a) Turn steering wheel so that vehicle's front tires are at
straight-ahead position.
b) Turn ignition switch to "LOCK" position and remove key.
4) Remove steering column hole cover (1).
5) Loosen steering column mounting nuts ("A", "B").
STEERING WHEEL AND COLUMN 3C-11
Advertisement
Table of Contents
