6E1-18 ENGINE AND EMISSION CONTROL SYSTEM
AIR INTAKE SYSTEM
THROTTLE BODY
1. Throttle body
2. Throttle stop screw
3. TP sensor
4. Gasket
5. Idle air control valve
6. IAC valve screws
ON-VEHICLE INSPECTION
• Check that throttle valve lever (1) moves smoothly.
REMOVAL
1) Disconnect negative cable at battery.
2) Drain cooling system.
3) Disconnect accelerator cable (1) from throttle valve lever.
4) Disconnect IAT sensor connector and remove air cleaner
7. TP sensor screws
Tightening torque
Do not reuse.
assembly with air cleaner outlet hose.