Table of Contents
Advertisement
9-6 BODY SERVICE
1
1
FRONT DOOR WINDOW REGULATOR
REMOVAL
2
INSPECTION
Check the following parts :
INSTALLATION
Reverse removal procedure to install window regulator noting the
following instruction.
"b"
"a"
1
1) Remove door glass referring to "FRONT DOOR GLASS" in
this section.
2) Disconnect power window motor lead wire at coupler and
loosen clamp, if equipped.
3) Loosen regulator mounting screws (1) and take out regulator
through hole (2) as shown in figure.
• Check regulator sliding and rotating parts for greasing (1).
• Check rollers (2) for wear and damage.
• When installing glass, check that the top part of the glass
contacts the glass run evenly and that the glass moves up
and down smoothly.
If the glass is tilted with respect to the glass run, adjust
equalizer (1) of window regulator so that measurement "a"
and "b" are equal.
Advertisement
Table of Contents
