Service Requirements And Application Scenarios; Configuration Procedure - Huawei SmartAX MA5603T Configuration Manual

Access module

Hide thumbs Also See for SmartAX MA5603T:

Table of Contents

SmartAX MA5600T/MA5603T/MA5608T Multi-service

Access Module

Commissioning and Configuration Guide

a small-cell base station through GUI pre-deployment in the scenario with the U2000 NMS

14.4.9.1 Service Requirements and Application Scenarios

Service Requirements

As the last mile that connects users to the Internet, small-cell backhaul is an important part of

an FTTx network. For small-cell backhaul, customers expect to:

Application Scenarios

from small-cell base stations through Ethernet ports and then send the service data to the OLT.

The OLT restores the Ethernet signals and adds 2 VLAN tags (QinQ VLAN encapsulation) to

the data, so that the data from the small cell bases can be transparently transmitted to the peer

PTN devices through the public network and then the PTN devices restore them to the original

ONU applicable to this scenario: MA5694S

Figure 14-33 Implementing access service of a small-cell base station

The following figure shows the configuration procedure for implementing the access service of

a small-cell base station (in QinQ VLAN mode through GUI pre-deployment).

Issue 01 (2014-04-30)

Make full use of the existing access resources to provide backhaul services for distributed

small-cell base stations.

Use a simple and mature service configuration scheme, featuring a high transmission

efficiency in addition to ensuring the QoS.

Simplify sites to lower the site installation and maintenance costs.

14-33, ONUs, functioning as Dock devices, receive Ethernet service data

Huawei Proprietary and Confidential

14 FTTM Configuration (Base Station Access)

Show Quick Links

Table of Contents

Smartax ma5600t Smartax ma5608t