Lnstallation - Honda Civic Service Manual

Rear Damper
I
lnstallation
' 1 . L o w e r t h e r e a r s u s p e n s i o n , a n d p o s i t i o n t h e
damper with the spring stop pointed toward the left
SPRING STOP
2.
Loosely installthe two flange nuts
FLANGE NUTS
10 x 1.25 mm
49 N.m (5 kgf.m, 36 lbt'ft)
Tighten these nuts in
step 7.
l r
3.
Loosely install the flange bolts.
FLANGE BOLT
10 x 1.25 mm
54 N.m {5.5 kgf m, 40 lbt'ft1
FLANGE BOLT
10 x 1 .25 mm
54 N.m {5.5 kgf.m,
/r0 lb{.ft|
7 .
Raise the rear suspension with a floor jack until the
vehicle just lifts off the safety stand.
!@@
Tne floor iacx must be securelY Posi-
tionod or peFonal iniury may rssull
Tighten the flange bolts.
Tighten the two flange nuts on top of the damper to
the specified torque.
Check the rear wheel alignment and adjust if neces-
sary (see page 18-4).
1A-29