Testing Microphones On The Cts - Cisco CTS-3010 Administration Manual

Managing Hardware Setup
The Microphone Troubleshooting screen displays the number of microphones available for testing:
•
Testing Microphones
Go to the following sections to test microphones:
•
•
•

Testing Microphones on the CTS 500

To test microphones on the CTS 500, follow these steps:
Log in to the Cisco TelePresence System Administration window.
Step 1
Choose Troubleshooting > Hardware Setup.
Step 2
Click the Microphones radio button.
Step 3
Click Start in the Testing box to begin the test. The Microphone Calibration button is activated.
Step 4
Lightly tap each microphone and watch the audio meter on the corresponding display screen to see that
Step 5
sound registers.
Click Stop to end the test.
Step 6
Cisco TelePresence System Release 1.6 Administration Guide
4-20
CTS 500—1 microphone with a single audio meter displayed on a single test screen.
Testing Microphones on the CTS 500, page 4-20
Troubleshooting Microphones, page 4-21
Related Information, page 4-22
Chapter 4 Troubleshooting the CTS 500
OL-13676-05