Cisco CTS-3010 Administration Manual page 88

Managing Hardware Setup
Saving Your Settings
When you have configured all your settings, follow these steps:
Click Apply to register new or modified settings.
Step 1
Click Reset to restore the original settings.
Step 2
For more information about testing and troubleshooting the CTS 500 camera, see the
Cameras
Care, and Field Replaceable Unit
Reattaching the Camera Haze and Replacing the Hood
Attach the camera haze cover to the front of the camera lens. The haze cover is the cover with the square
Step 1
edges that goes over the lens as shown in
Snap the camera hood back into place.
Step 2
Figure 4-9
1
Cisco TelePresence System Release 1.6 Administration Guide
4-16
section in the First-Time Setup
Guide.
Attaching Camera Haze Cover Camera Lens
chapter of the Cisco TelePresence System 500 Assembly, Use &
Figure 4-9.
Chapter 4 Troubleshooting the CTS 500
Setting Up the
OL-13676-05