Table of Contents
Advertisement
Chapter 6
Troubleshooting the CTS 1100
The table must be 28 to 32 inches (71 to 81 cm) high; 30 inches (76 cm) is the optimal height.
Note
Figure 6-5
Managing Focus Adjustments and Adjusting the Camera Zoom
To adjust the zoom and perform initial focus adjustment for the camera, complete the steps in the
following procedure.
Step 1
Place the large camera target with the easel in the position where the two participants will sit, with the
front legs of the easel touching the edge of the table.
Step 2
Measure the distance between the corners of the easel and the corners of the display to make sure that
the target is parallel to the display, as shown in
Figure 6-6
OL-13676-04
Table Positioning
A
44 inches
(112 cm)
minimum
18 inches
(46 cm)
30 inches (76 cm)
between participants
Measuring the Distance between the Easel and Display
Center participant
sitting position
camera target
A=B
B
8 feet (244 cm) recommended,
12 feet (366 cm) maximum)
Figure
6-6.
Display
Same distance
Cisco TelePresence System Release 1.5 Administrator Guide
Managing Hardware Setup
6-9
Advertisement
Table of Contents
Troubleshooting
