Chapter 6
Troubleshooting the CTS 1100
Figure 6-1
troubleshooting tasks.
Figure 6-1
Note
CTS initial setup is also performed using the Hardware Setup fields. For information on how to configure
CTS for the first time, see the
Replacement Unit
Managing Displays
A display is set up successfully when the color on the display has been adjusted for the lighting in the
meeting room.
Use the information in the following sections to adjust the display for your system:
•
•
•
•
OL-13676-04
shows the Cisco TelePresence System administrative tools that are available to assist you with
Troubleshooting Window
Guide.
Selecting the Light Level, page 6-4
Adjusting Your Display, page 6-4
Troubleshooting Displays, page 6-5
Related Information, page 6-5
Cisco TelePresence System 1100 Assembly, Use & Care, and Field
Cisco TelePresence System Release 1.5 Administrator Guide
Managing Hardware Setup
6-3