Table of Contents
Advertisement
Chapter 6
Troubleshooting the CTS 1100
Figure 6-8
The display projects the image from the camera, with the addition of a red plus sign in the center of the
display.
Automatically adjust the camera by completing the following steps:
Step 8
a.
In the Auto Brightness field, perform one of the following actions:
•
•
b.
In the Auto Color Balance field, perform one of the following actions:
•
•
c.
In the 50 Hz Flicker Reduction field, click the Disable radio button.
OL-13676-04
Camera Target Menu
If the room uses outside lighting, or has any other conditions that could cause variable room
lighting, click the Enable radio button.
If your room lighting is not variable, leave the default value.
If the room uses outside lighting, or has any other conditions that could cause variable room
lighting, click the Enable radio button.
If your room lighting is not variable, leave the default value.
Cisco TelePresence System Release 1.5 Administrator Guide
Managing Hardware Setup
6-11
Advertisement
Table of Contents
Troubleshooting
