Table of Contents
Advertisement
Preface
Password Aging
To ensure that your system is protected when using Cisco TelePresence Command Line Interface (CLI),
you must periodically update your password. In CTS Release 1.6.0, the system alerts you to the number
of days remaining on your current password in the login banner when you log onto the system. In CTS
Release 1.6.0 and later releases, the system issues a warning when 14 days remain on your current
password, and so on until the password expires. You may get a message similar to the following at login:
"Password change required in 10 days"
The password life (the maximum age, in days) is managed using new fields on the Cisco Unified CM
Device > Phone > Product Specific Configuration Layout > Secure Shell Information page:
SSH Admin Life
•
SSH Helpdesk User
•
SSH Helpdesk Password
•
SSH Helpdesk Life
•
Password expiration is fixed at 60 days. A setting of 0 disables password aging. Unless the configured
life has been disabled (by being set to 0), password age is set to have 2 days remaining in the following
situations:
New installations and factory resets.
•
Software upgrades (if the password age is less than the configured age).
•
Password recovery (by logging in using your pwrecovery account).
•
Note
When the password age has expired, a warning message is shown briefly on-screen before logging out.
For more information see the Secure Shell Information section in the
Manager Configuration Guide for the Cisco TelePresence System.
System Command-Line Interface Reference
Presentation Output Device
In Cisco Unified CM, the Presentation Output Device field in the Product Specific Configuration Layout
window for the CTS 3000 and CTS 3200 contains a new choice in the drop-down menu: None. See the
Cisco Unified Communications Manager Configuration Guide for the Cisco TelePresence System
detailed information.
Quality Per Display - 720p (Lite)
Part of the
Display field can be set to "High Detail, Limited Motion: 720p (Lite)." This allows a CTS endpoint to
work on a T1 (1.544 Mbps) connection over a VPN connection and enables "1 Frame per Second"
(1FPS) capability. The T1 CTS endpoint supports the following:
•
T1 (clear channel) without VPN—720p Lite, 1fps presentation without audio add-in.
•
E1 (channelized) IPsec with VPN—720p Lite, 1fps presentation without audio add-in.
•
E1 (clear channel) without VPN—720P good, 5fps presentation without audio add-in.
•
Progressive IDR frames option enabled for media.
•
936kbps main video display 720p bitstream enables
and audio, to fit in a T1 channel with presentation compressed down to 100kbps at 1fps.
•
1 frame per second (FPS) auto-collaboration.
OL-13676-05
E1/T1 Support - Extended Reach
See also the
Guide.
package of features, in Cisco Unified CM, the Quality per
HD Interoperability
Cisco TelePresence System Release 1.6 Administration Guide
Cisco Unified Communications
Cisco TelePresence
video, along with overhead
for
vii
Advertisement
Table of Contents
Troubleshooting
