Table of Contents
Advertisement
System Information Details
Table 2-3
Field or Button
Audio_Extension_UnitID
Audio_Extension_Unit_FAB_Ver
Audio_Extension_Unit_FW_Ver
Audio_Clock_Source
Audio_PCB_S/N
Audio_PCB_P/N
Audio_PCB_Rev
PoE_Reset_Available
Mfg_Installed_Cert
Locally_Significant_Cert
Max_Security_Setting
Aux Control Unit_Model
Aux Control Unit_Ver
Aux Control Unit_UDI_Vid
Aux Control Unit_UDI_Pid
Aux Control Unit_UDI_Sn
Projector_Model
1. CTS 1300 displays information for Center, Left, and Right cameras.
2. The document camera is not available on the CTS 1300.
3. CTS devices are backward compatible up to two CTS Software Releases. Cisco recommends that you upgrade to the latest
version software.
Cisco TelePresence System Release 1.6 Administration Guide
2-8
System Information Details Fields (continued)
Setting or Description
Type of audio extension board (AEB). The board type is either
0xAE or is disconnected.
Note
Hardware version of the audio extension board.
Firmware version on the audio extension board.
Clock source syncing the audio and video streams.
CTS 500 and CTS 1300 only. Unique device identification
(UDI) containing serial numbers unique to that printed circuit
board (PCB).
CTS 500 and CTS 1300 only. Unique device UDI containing
part numbers unique to that PCB.
CTS 500 and CTS 1300 only. Unique UDI containing hardware
revision information unique to that PCB.
Indicates whether Power over Ethernet (PoE) Reset feature is
available.
Security certificate for encryption defined by Cisco Root
Certificate Authority.
Security certificate obtained through Certificate Authority
Proxy Function (CAPF), which supersedes the manufacturing
installed security certificate.
Configured security setting.
Auxiliary control unit model.
Auxiliary control unit system firmware version.
Auxiliary control unit unique device identifier version
identification.
Auxiliary control unit unique device identifier product
identification number.
Auxiliary control unit unique device identifier serial number
Projector model number, if projector is installed.
Data displays connected directly to the CTS detects
both cable and power. Data displays connected with an
AEB can only detect the cable connection, not power.
See the
"Testing Presentation Devices" section on
page
8-24.
Chapter 2
Device Information
OL-13676-05
Advertisement
Table of Contents
Troubleshooting
