Cisco TelePresence System Profile 52” Dual Installation Sheet

Installing Cisco TelePresence System Profile 52" Dual
The Profile 52" Dual delivery contains:
Monitor box: Monitor back cover box:
• Two monitors and • Monitor back cover
speaker grilles
• Monitor brackets
Bottom module column • M4×25 and M4×8 screws for the monitor
brackets
Camera
• Camera bracket
Touch Screen CS
• Wing nuts for the camera bracket
Foot module box:
Accessories box:
• Foot module (stand-alone or wall
• Cables
mounting)
• Microphones, 4 pcs
• Four M8×45 screws
• Remote control and 4 AAA batteries
• Two wall mounting brackets and four
• Gloves, 2 pairs
M6×10 screws (for wall mounting only)
• Cleaning cloth
• Wrench
• Allen key, screwdriver
• Level adjustment tool (orange)
• Four M8×16 screws
Unpacking and assembling Profile 52" Dual
1
Content overview
Remove the outer cover and locate the different boxes as illustrated below.
HEAVY
CAUTION
Bottom module column
Monitor back cover and monitor brackets
HEAVY
CAUTION Foot module
Touch screen
Accessories box
Camera
Rev. Date Prep. Checked Change
Telecom AS
120601 rev.
Packaging Kit Profile 52" Dual
3D CAD model file 120601 rev. 03 is master
HEAVY
The monitors come in a separate box. The monitor box contains monitors and speaker grilles
for the monitors. Remove the lid and locate the left and right monitor and the speaker grilles.
CAUTION
Right and left monitor
78-19776-01revB Profile 52 Dual Installation Sheet | April 2012 | © 2010-2012 Cisco Systems, Inc. All rights reserved.
Left monitor
Right monitor
2
Lift the column out of the package. Mount the column to the foot
module to complete the bottom module
Grab here when
lifting the column.
HEAVY
CAUTION
Sheet 1 of 1 Processes Tolerances Specification: Material Surface treatment
- Type: - -
European
- Manufacturer: - -
projection
- Type number: - -
Thickness: - - 3
Unit: mm Dimensions without paint or finish Color: - -
WHEN YOU HAVE A WALL MOUNTING FOOT MODULE:
Surface: - -
Sheet size: A3 All materials, finishes, and proccesses
must comply with the RoHS directives Glossiness: - -
Scale: 1:8
Flame class: - -
Part weight: 71743g Flame class requirement: - UL reference: - - Mount the column to the foot module and fasten it to the wall
1. Mount the column to the wall mounting foot module, similar to step 2.
2. Fasten the wall brackets to the bottom module with the four M6×10 screws.
Use the Allen key.
3. Place the bottom module by the wall, mark where to fasten the bracket and
move the bottom module away.
4. Add the suitable fixing device for the screws in the wall, and fasten the
bottom module.
LEVELLING ADJUSTMENT
Make sure the unit is stable.
Place the orange level adjustment tool on the
foot wheel under the foot module for height
adjustment.
Seen from above, turn clockwise to adjust the
height up. Use the opposite side of the tool
and turn counterclockwise to adjust down.
PRECAUTIONS
Please follow the steps in this installation guide when unpacking and
assembling Profile 52" Dual.
MANPOWER
A minimum of two (2) persons are required when installing
Profile 52" Dual.
UNPACKING THE SYSTEM AT THE DESTINATION
It is highly recommend to start the unpacking and assembling of
Profile 52" Dual at the place where it is to be used.
If it is not possible to bring the complete delivery to the room where
Profile 52" Dual is to be used, then unpack and bring the smaller units
to the destination.
• The monitor box requires two (2) persons to lift 55 kg / 121 lb).
Column
• The bottom module column requires two (2) persons to lift
(40 kg / 88 lb).
Stand-alone
• The foot module requires two (2) persons to lift
foot module
(stand-alone: 35 kg / 77 lb; wall-mounting: 20 kg / 44 lb).
FASTEN THE COLUMN TO THE FOOT MODULE
1. Make sure the foot module has been placed at its permanent location.
2. Place the column on the foot module, open the rear door, and remove the door
stop bracket.
3. Carefully open the rear door completely.
4. Use four M8×45 screws and fasten the column to the foot module.
5. Mount the door stop bracket back in place.
Use the wrench to remove the door
stop bracket on the rear door before
fastening the column to the foot module.
Rear side
Door stop bracket
Page 1
INSTALLATION NEAR A SOCKET-OUTLET DIMENSIONS OF THE PROFILE 52" DUAL
The equipment must be installed near a socket-outlet. The socket- • Height: 63.8" / 162 cm
outlet shall be easily accessible after installation.
• Width: 94.9" / 241 cm
• Depth (wall mounting): 10.2" / 26 cm
ROOM GUIDELINES
• Depth (stand-alone): 17.7" / 45 cm
NOTE: The floor must be in level.
• Weight: 518 lb / 235 kg
The recommended distance between the Profile 52" Dual and the
meeting room table should be minimum 1.5 m / 59 in.
Read more about room guidelines in the Video conferencing room
primer.
USER DOCUMENTATION
The user documentation for this product, including compliance and
safety information, is available on the Cisco web site.
Go to: http://www.cisco.com/go/telepresence/docs.
Access the innermost screws from these holes.
EMC A Class declaration
4 * M8×45
Fasten the column
Allen key
to the foot module.
The bottom module is viewed from the rear side.
WARNING
Due to the size and weight of this equipment, it is very
important that the wall mount unit is safely installed according
to the installation instructions and that the wall is able to safely
support the product. It is highly recommended that the wall
mounted system is installed by trained personnel.
Add the suitable fixing device for the screws in the wall.
4 * M6×10
Allen key
Fasten the column
to the foot module.
The wall