Table of Contents
Advertisement
Managing Hardware Setup
Move the large camera target 86 inches (218 cm) from the display, and 18 inches (46 cm) overhanging
Step 1
the table on the right side.
Figure 7-54
Position the target to that it is parallel with the wall.
In the Cisco TelePresence administrative GUI, click the Right radio button.
Step 2
Click Show Camera Target.
Step 3
Focus the right camera by completing the following steps:
Step 4
Loosen the focus ring thumbscrew on the lens of the center camera.
a.
Rotate the focus ring until the black plus sign on the target is clearly in focus.
b.
Note
Cisco TelePresence System Release 1.6 Administration Guide
7-58
Location of Targets for Round and Square Tables
Display
86 inches
(218 cm)
18 inches
(46 cm)
Center participant
sitting position
camera target
The camera lens has two adjustment rings, one for focus and one for zoom. The focus ring is on
the inside.
86 inches
(218 cm)
18 inches
(46 cm)
Chapter 7
Troubleshooting the CTS 1300
OL-13676-04
Advertisement
Table of Contents
Troubleshooting
