Understanding Camera Setup Choices For Room Lighting - Cisco CTS-3010 Administration Manual

Managing Hardware Setup

Understanding Camera Setup Choices for Room Lighting

If your room has windows that contribute a significant amount of natural light, you can set your CTS to
automatically compensate for variable lighting conditions. This compensation is an average adjustment
and will not be as accurate as the color settings you select for a room that uses fixed, artificial room
lighting.
Table 8-2
display and camera. See the
more information.
Table 8-2
Physical Room Configuration
No windows, or all external light is covered or blocked Disable
One window
Two adjacent windows (corner office configuration)
Two opposing windows
Windows on three sides
Windows on four sides
1. Cisco recommends that you cover at least one of the windows.
Cisco TelePresence System Release 1.6 Administration Guide
8-14
contains recommendations for desirable display and camera settings when you set up the
"Testing the CTS 3000 and CTS 3200 Cameras" section on page 8-7
Room Configuration and Camera Setup Choices
1
Chapter 8 Troubleshooting the CTS 3000 and CTS 3200
Camera Auto Brightness and 
Camera Auto Color Balance Setup Choices
Enable
Enable
Enable
Enable
Enable
for
OL-13676-05