Command Example; Configuring An Alternate Tftp Server (Optional); Network Settings; Operational Vlan Id - Cisco CTS-3010 Administration Manual

Chapter 3 Configuring the Cisco TelePresence System
set network IP static ip-address ip-subnet ip-gateway [dns-address1][dns-address2][domain-name]
Where:
ip-address is the IP address of the system
ip-subnet is the IP subnet mask of the system
ip-gateway is the IP gateway of the system
dns-address1 is the IP address of DNS server 1 (Optional)
dns-address2 is the IP address of DNS server 2 (Optional)
domain-name is the domain name for the network (Optional)

Command Example

The following example gives the Cisco TelePresence system with an IP address of 10.0.0.2, a subnet of
255.255.255.0, a gateway of 10.0.0.1, a DNS server of 172.16.1.5, and a domain name of cisco.com:
admin:set network IP static 10.0.0.2 255.255.255.0 10.0.0.1 172.16.1.5 cisco.com
ip address successfully set
system restarting...

Configuring an Alternate TFTP Server (Optional)

If you need to use an alternative TFTP server, configure the parameters for the alternative TFTP server
and related Cisco IP phone parameters in Unified CM on the Cisco Unified Communications Manager
IP Phone Device page. See the
Cisco TelePresence System
If you are using the TFTP address that DHCP supplies for Cisco Unified Communications Manager, do
Note
not perform this action.

Network Settings

You can view or configure the following settings in the Network Settings window:
•
•
•

Operational VLAN ID

This field shows a display-only VLAN ID that is standard for networks with a Cisco Unified IP phone.
OL-13676-05
for more information.
Operational VLAN ID, page 3-9
Administrative VLAN ID, page 3-10
Syslog Address, page 3-10
Cisco Unified Communications Manager Configuration Guide for the
Cisco TelePresence System Release 1.6 Administration Guide
Network Settings
3-9