Cisco CTS-3010 Administration Manual page 126

Managing Hardware Setup
Figure 5-3
Click Remove Camera Target to stop the test.
Step 8
Step 9 Proceed to the following sections:
• Tuning the Camera, page 5-11
• Setting the Camera Yaw, page 5-12
• Adjusting the Pan of the Camera, page 5-12
• Adjusting the Tilt of the Camera, page 5-13
Cisco TelePresence System Release 1.6 Administration Guide
5-10
Location of Adjustment Screws
Chapter 5 Troubleshooting the CTS 1000
Pan screws
Yaw screws
Lens
Tilt screw
OL-13676-05