Understanding Camera Setup Choices For Room Lighting - Cisco CTS-3010 Administration Manual

Administration guide
Hide thumbs Also See for CTS-3010:
Table of Contents

Advertisement

Chapter 5
Troubleshooting the CTS 1000
c.
Saving Your Settings
When you have configured all your settings, follow these steps:
Click Apply to register new or modified settings.
Step 1
Click Reset to restore the original settings.
Step 2
For more information about testing and troubleshooting the CTS 1000, see the
section in the
Attaching the Camera Hood
To attach the camera hood, follow these steps:
Be very careful attaching the camera hood so as not to affect the focus or alignment of the camera.
Caution
Carefully fit the hood lightly over the camera without bumping the camera.
Step 1
Step 2
Align the two screw holes align in the bottom of the hood with threaded holes in the camera support
bracket and secure with two M4 x 10 mm screws.

Understanding Camera Setup Choices for Room Lighting

If your room has windows that contribute a significant amount of natural light, you can set your CTS to
automatically compensate for variable lighting conditions. This compensation is an average adjustment
and will not be as accurate as the color settings you select for a room that uses fixed, artificial room
lighting.
Table 5-2
display and camera. See the
Table 5-2
Physical Room Configuration
No windows, or all external light is covered or blocked Disable
One window
Two adjacent windows (corner office configuration)
Two opposing windows
Windows on three sides
Windows on four sides
1. Cisco recommends that you cover at least one of the windows.
OL-13676-05
Lean backward away from the table.
Cisco TelePresence 1000 Assembly, Use & Care, and Field-Replacement Unit
contains recommendations for desirable display and camera settings when you set up the
"Testing the CTS 1000 Camera" section on page 5-6
Room Configuration and Camera Setup Choices
1
Camera Auto Brightness and 
Camera Auto Color Balance Setup Choices
Enable
Enable
Enable
Enable
Enable
Cisco TelePresence System Release 1.6 Administration Guide
Managing Hardware Setup
Setting Up the Camera
Guide.
for more information.
5-15

Advertisement

Table of Contents

Troubleshooting

loading

This manual is also suitable for:

Telepresence system

Table of Contents