Chapter 8
Troubleshooting the CTS 3000 and CTS 3200
To test an external presentation device, follow these steps:
Log in to the Cisco TelePresence System.
Step 1
Step 2
Navigate to Troubleshooting > Hardware Setup > Presentation Devices.
Step 3
Click the Test Pattern radio button.
Step 4
Click Start to begin the test.
The test pattern should display on the external presentation display.
Step 5
Click Stop to end the testing.
OL-13676-05
Cisco TelePresence System Release 1.6 Administration Guide
Managing Hardware Setup
8-23