Table of Contents
Advertisement
Chapter 3
Configuring the Cisco TelePresence System
Choose Configuration > System Settings.
Step 1
View the system settings information described in
Step 2
Table 3-5
Field
Username/Password Configuration
Username
New Password
New Password (verify)
Quality Configuration
Overall System Quality
Locale Configuration
Time Zone
Language
Cisco TelePresence System Configuration
OL-13676-05
System Settings
Description or Setting
Displays username and password.
Note
Usernames and passwords must be at least 4 characters, but not
more than 64 characters in length, and can contain upper and lower
case alphanumeric characters and the underscore and dash
characters. The following usernames are not allowed: apache,
daemon, nobody, operator, and shutdown.
This field displays the system bandwidth and screen resolution. The
bandwidth is the maximum negotiated video bandwidth for a CTS call. A
higher bandwidth increases video quality.
Choose from the following:
•
Highest Detail, Best Motion: 4Mbps 1080p (default)
•
Highest Detail, Better Motion: 3.5Mbps, 1080p
•
Highest Detail, Good Motion: 3Mbps, 1080p
•
High Detail, Best Motion: 3Mbps, 720p
High Detail, Better Motion: 2Mbps, 720p
•
High Detail, Good Motion: 1Mbps, 720p
•
High Detail, Limited Motion: 720p (Lite)
•
The audio addin conf softkey is not available on the
Note
Cisco Unified IP Phone when using the 720p (Lite) feature.
Non-secure audio add-in is not supported; all audio add-ins must
be secure or the call will be dropped.
Displays the configured time zone for your area of the world from the
drop-down menu.
Displays the configured language for CTS.
Cisco TelePresence System Release 1.6 Administration Guide
Table
3-5.
System Settings
3-15
Advertisement
Table of Contents
Troubleshooting
