Cisco CTS-3010 Administration Manual page 97

Chapter 4 Troubleshooting the CTS 500
Log in to the Cisco TelePresence System Administration window.
Step 1
Choose Troubleshooting > Hardware Setup.
Step 2
Click the Presentation Devices radio button.
Step 3
Click Start in the Testing box. The Presentation Source buttons are activated.
Step 4
Step 5 Click Set Projector Defaults to reset the projector to the default settings.
Step 6 Click Stop in the Testing box to complete the task.
OL-13676-05
Cisco TelePresence System Release 1.6 Administration Guide
Managing Hardware Setup
4-25