System Command Changes - Cisco TelePresence SX80 Reference Manual

Cisco TelePresence SX80
Contents Introduction Introduction

System command changes

New commands
Camera Preset Snapshot Get
Camera Preset Snapshot Remove
Camera Preset Snapshot Store
Cameras SpeakerTrack Whiteboard ActivatePosition
Cameras SpeakerTrack Whiteboard AlignPosition
Cameras SpeakerTrack Whiteboard SetDistance
Cameras SpeakerTrack Whiteboard StorePosition
SystemUnit OptionKey List (TC7.3.3)
SystemUnit OptionKey Remove (TC7.3.3)
Video Matrix Assign
Video Matrix Reset
Video Matrix Swap
Video Matrix Unassign
Codec SX80 API Reference Guide TC7.3, OCTOBER 2015.
D15107.05
About the API xConfiguration
Commands that are modified
Audio LocalOutput Add (TC7.3.3)
NEW: VolumeControlled: <On/Off>
Audio LocalOutput Update (TC7.3.3)
NEW: VolumeControlled: <On/Off>
CallHistory Get
OLD: Filter: <All/Missed/AnsweredElsewhere/Forwarded/
Placed/NoAnswer/Received/UnacknowledgedMissed>
NEW: Filter: <All/Missed/AnsweredElsewhere/
Forwarded/Placed/NoAnswer/Received/Rejected/
UnacknowledgedMissed>
CallHistory Recents
OLD: Filter: <All/Missed/AnsweredElsewhere/Forwarded/
Placed/NoAnswer/Received/UnacknowledgedMissed>
NEW: Filter: <All/Missed/AnsweredElsewhere/
Forwarded/Placed/NoAnswer/Received/Rejected/
UnacknowledgedMissed>
Camera Preset Store
NEW: TakeSnapshot <False/True>
Presentation Start
NEW: Instance: <New/1/2/3/4/5/6>
NEW: OutputId: <1 – 4>
Presentation Stop
NEW: Instance: <New/1/2/3/4/5/6>
UserInterface ScreenShot Get
OLD: ScreenShotId: 0 – 35
NEW: ScreenShotId: 0 – 50
UserInterface ScreenShot Remove
OLD: ScreenShotId: 0 – 255
NEW: ScreenShotId: 0 – 50
8
xCommand xStatus
UserInterface ScreenShot Request
OLD: ScreenShotId: 0 – 35
NEW: ScreenShotId: 0 – 50
UserInterface ScreenShot Store
OLD: ScreenShotId: 0 – 255
NEW: ScreenShotId: 0 – 50
Copyright © 2015 Cisco Systems, Inc. All rights reserved.
API Reference Guide
Appendices