Vlan Database - Cisco 4500M Command Reference Manual

Chapter2 Cisco IOS Commands for the Catalyst 4500 Series Switches

vlan database

To enter VLAN configuration mode, use the vlan database command.
Syntax Description
This command has no arguments or keywords.
Defaults
This command has no default settings.
Command Modes
Privileged EXEC
Command History Release
12.1(8a)EW
Usage Guidelines
From VLAN configuration mode, you can access the VLAN database editing buffer manipulation
commands, including:
•
•
•
•
•
•
•
•
Examples
This example shows how to enter VLAN configuration mode:
Switch# vlan database
Switch(vlan)#
This example shows how to exit VLAN configuration mode without applying changes after you are in
VLAN configuration mode:
Switch(vlan)# abort
Aborting....
Switch#
78-16201-01
vlan database
Modification
Support for this command was introduced on the Catalyst 4500 series switch.
abort—Exits mode without applying the changes.
apply—Applies current changes and bumps the revision number.
exit—Applies changes, bumps the revision number, and exits VLAN configuration mode.
no —Negates a command or sets its defaults; valid values are vlan and vtp.
reset—Abandons current changes and rereads the current database.
show—Displays the database information.
vlan—Accesses subcommands to add, delete, or modify values that are associated with a single
VLAN. For information about the vlan subcommands, see the
command.
vtp—Accesses subcommands to perform VTP administrative functions. For information about the
vtp subcommands, see the
Catalyst4500 Series SwitchCiscoIOS Command Reference—Release 12.2(18)EW
vtp client command.
vlan database
vlan (VLAN Database mode)
2-499