Dot1X Initialize - Cisco 4500M Command Reference Manual

dot1x initialize

dot1x initialize
To unauthorize an interface before reinitializing 802.1x, use the dot1x initialize command.
Syntax Description
interface
Defaults
This command has no default settings.
Command Modes
Privileged EXEC
Command History Release
12.1(12c)EW
Usage Guidelines
Use this command to initialize state machines and to set up the environment for fresh authentication.
Examples
This example shows how to initialize the 802.1x state machines on an interface:
Switch# dot1x initialize
Switch#
Related Commands
dot1x initialize
show dot1x
Catalyst4500 Series SwitchCiscoIOS Command Reference—Release 12.2(18)EW
2-82
dot1x initialize interface
The number of the interface.
Modification
Support for this command was introduced on the Catalyst 4500 series switch.
Chapter2 Cisco IOS Commands for the Catalyst 4500 Series Switches
78-16201-01