Chapter2
Cisco IOS Commands for the Catalyst 4500 Series Switches
pagp port-priority
To select a port in hot standby mode, use the pagp port-priority command. To return to the default
value, use the no form of this command.
Syntax Description
priority
Defaults
Port priority is set to 128.
Command Modes
Interface configuration
Command History
Release
12.1(8a)EW
Usage Guidelines
The higher the priority, the better the chances are that the port will be selected in the hot standby mode.
Examples
This example shows how to set the port priority:
Switch(config-if)# pagp port-priority 45
Switch(config-if)#
Related Commands
pagp learn-method
show pagp
78-16201-01
pagp port-priority priority
no pagp port-priority
Port priority number; valid values are from 1 to 255.
Modification
Support for this command was introduced on the Catalyst 4500 series switch.
Catalyst4500 Series SwitchCiscoIOS Command Reference—Release 12.2(18)EW
pagp port-priority
2-189