Show Auto Qos - Cisco 4500M Command Reference Manual

Chapter2 Cisco IOS Commands for the Catalyst 4500 Series Switches

show auto qos

To display the automatic quality of service (auto-QoS) configuration that is applied, use the show auto
qos user EXEC command.
Syntax Description
interface interface-id
begin
exclude
include
expression
Command Modes
Privileged EXEC
Command History Release
12.1(19)EW
Usage Guidelines
The show auto qos interface interface-id command displays the auto-QoS configuration; it does not
display any user changes to the configuration that might be in effect.
To display information about the QoS configuration that might be affected by auto-QoS, use one of these
commands:
•
•
•
•
Expressions are case sensitive. For example, if you enter exclude output, the lines that contain output
do not appear, but the lines that contain Output appear.
78-16201-01
show auto qos [interface [interface-id]] [{begin | exclude | include} expression]
(Optional) Displays auto-QoS information for the specified interface or
for all interfaces. Valid interfaces include physical ports.
(Optional) Begins with the line that matches the expression.
(Optional) Excludes lines that match the expression.
(Optional) Includes lines that match the specified expression.
(Optional) Expression in the output to use as a reference point.
Modification
Support for this command was introduced on the Catalyst 4500 series switch.
show qos
show qos map
show qos interface interface-id
show running-config
Catalyst4500 Series SwitchCiscoIOS Command Reference—Release 12.2(18)EW
show auto qos
2-241