Debug Ip Dhcp Snooping Event - Cisco 4500M Command Reference Manual

Chapter2 Cisco IOS Commands for the Catalyst 4500 Series Switches

debug ip dhcp snooping event

To debug DHCP snooping events, use the debug ip dhcp snooping event command. To disable
debugging output, use the no form of this command.
Syntax Description
This command has no arguments or keywords.
Defaults
Debugging of snooping event is disabled.
Command Modes
Privileged EXEC
Command History Release
12.1(12c)EW
Examples
This example shows how to enable debugging for DHCP snooping events:
Switch# debug ip dhcp snooping event
Switch#
This example shows how to disable debugging for DHCP snooping events:
Switch# no debug ip dhcp snooping event
Switch#
Related Commands
debug ip dhcp snooping packet
78-16201-01
debug ip dhcp snooping event
no debug ip dhcp snooping event
Modification
Support for this command was introduced on the Catalyst 4500 series switch.
Catalyst4500 Series SwitchCiscoIOS Command Reference—Release 12.2(18)EW
debug ip dhcp snooping event
2-53