Cisco 4500M Command Reference Manual page 431

Chapter2 Cisco IOS Commands for the Catalyst 4500 Series Switches
This example shows how to display the VLAN parameters for VLAN 3 only:
Switch# show vlan id 3
VLAN Name
---- -------------------------------- --------- -------------------------------
3
VLAN Type
---- ----- ---------- ----- ------ ------ -------- ---- -------- ------ ------
3
Table2-19
Table2-19 show vlan Command Output Fields
Field
VLAN
Name
Status
Ports
Type
SAID
MTU
Parent
RingNo
BrdgNo
Stp
Related Commands
vlan database
vlan (VLAN Database mode)
vtp (global configuration mode)
78-16201-01
VLAN0003
SAID MTU
enet 100003 1500
describes the fields in the show vlan command output.
Description
VLAN number.
Name, if configured, of the VLAN.
Status of the VLAN (active or suspend).
Ports that belong to the VLAN.
Media type of the VLAN.
Security Association Identifier value for the VLAN.
Maximum transmission unit size for the VLAN.
Parent VLAN, if one exists.
Ring number for the VLAN, if applicable.
Bridge number for the VLAN, if applicable.
Spanning Tree Protocol type used on the VLAN.
Catalyst4500 Series SwitchCiscoIOS Command Reference—Release 12.2(18)EW
Status Ports
active Fa5/9
Parent RingNo BridgeNo Stp
- - -
BrdgMode Trans1 Trans2
- - 303 0
show vlan
2-399