Spanning-Tree Mst Forward-Time - Cisco 4500M Command Reference Manual

Chapter2 Cisco IOS Commands for the Catalyst 4500 Series Switches

spanning-tree mst forward-time

To set the forward delay timer for all the instances, use the spanning-tree mst forward-time command.
To return to the default settings, use the no form of the command.
Syntax Description
seconds
Defaults
The forward delay timer is set for 15 seconds.
Command Modes
Global configuration
Command History Release
12.1(12c)EW
Examples
This example shows how to set the forward-delay timer:
Switch(config)# spanning-tree mst forward-time 20
Switch(config)#
Related Commands
show spanning-tree mst
78-16201-01
spanning-tree mst forward-time seconds
no spanning-tree mst forward-time
Number of seconds to set the forward delay timer for all the instances on the
Catalyst4500 series switch; valid values are from 4 to 30 seconds.
Modification
Support for this command was introduced on the Catalyst 4500 series switch.
Catalyst4500 Series SwitchCiscoIOS Command Reference—Release 12.2(18)EW
spanning-tree mst forward-time
2-433