Debug Lacp - Cisco 4500M Command Reference Manual

debug lacp

debug lacp
To debug LACP activity, use the debug lacp command. To disable debugging output, use the no form of
this command.
Syntax Description
all
event
fsm
misc
packet
Defaults
Debugging of LACP activity is disabled.
Command Modes
Privileged EXEC
Command History Release
12.1(13)EW
Usage Guidelines
This command is supported by the supervisor engine only and can be entered only from the switch
console.
Examples
This example shows how to enable LACP miscellaneous debugging:
Switch# debug lacp
Port Aggregation Protocol Miscellaneous debugging is on
Switch#
Related Commands
undebug pagp (same as no debug pagp)
Catalyst4500 Series SwitchCiscoIOS Command Reference—Release 12.2(18)EW
2-56
debug lacp [all | event | fsm | misc | packet]
no debug lacp
(Optional) Enables all LACP debugging.
(Optional) Enables debugging of LACP events.
(Optional) Enables debugging of the LACP finite state machine.
(Optional) Enables miscellaneous LACP debugging.
(Optional) Enables LACP packet debugging.
Modification
Support for this command was introduced on the Catalyst 4500 series switch.
Chapter2 Cisco IOS Commands for the Catalyst 4500 Series Switches
78-16201-01