Cisco 4500M Command Reference Manual page 409

Chapter2 Cisco IOS Commands for the Catalyst 4500 Series Switches
!
!
!
interface FastEthernet1
no ip address
shutdown
duplex auto
speed auto
Switch#
This example shows the output for the show running-config command when you have enabled the
switchport voice vlan command:
Switch# show running-config int fastethernet 6/1
Building configuration...
Current configuration:133 bytes
!
interface FastEthernet6/1
switchport voice vlan 2
no snmp trap link-status
spanning-tree portfast
channel-group 1 mode on
end
Switch#
78-16201-01
Catalyst4500 Series SwitchCiscoIOS Command Reference—Release 12.2(18)EW
show running-config
2-377