How to Configure ANCP on Cisco ASR 9000 Series Routers
Command or Action
Step 9
show ancp neighbor [all] [statistics]
Example:
RP/0/RSP0/CPU0:router# show ancp neighbor
statistics
Step 10
show ancp neighbor state [none | synsent |
synrcvd | estab} [statistics]
Example:
RP/0/RSP0/CPU0:router# show ancp neighbor
none
Mapping AN Ports to VLAN Subinterfaces
Port mapping associates DSLAM access ports or customer premises equipment (CPE) clients of a
DSLAM with VLAN subinterfaces. The VLANs can be IEEE 802.1Q or QinQ hierarchical VLANs. To
map AN ports to VLAN subinterfaces, use the ancp an-port command in global configuration mode.
SUMMARY STEPS
1.
2.
3.
4.
5.
6.
7.
8.
9.
Cisco ASR 9000 Series Aggregation Services Router Modular Quality of Service Configuration Guide
QC-100
configure
ancp an-port circuit-id Access-Loop-Circuit-Id [interface type interface-path-id | interface
Bundle-Ether bundle-id]
end
or
commit
show ancp an-port {circuit-id Access-Loop-Circuit-Id | interface type interface-path-id |
interface Bundle-Ether bundle-id | mapping} [statistics | detail]
show ancp an-port [configured | dynamic-only] [statistics]
show ancp an-port summary [statistics] [detail]
clear ancp an-port {all | circuit-id Access-Loop-Circuit-Id | interface type interface-path-id |
interface Bundle-Ether bundle-id | neighbor {description string | sender-name {H.H.H |
A.B.C.D}} [statistics]
show ancp an-port {description description-string | sender-name {H.H.H | A.B.C.D}}
show ancp an-port state [up | down | none] [statistics]
Configuring Access Node Control Protocol on Cisco ASR 9000 Series Routers
Purpose
(Optional) Displays ANCP neighbor information.
(Optional) Displays adjacency protocol state
information.
OL-23108-02