Show Qos Interface - Cisco 4500M Command Reference Manual

show qos interface

show qos interface
To display queueing information, use the show qos interface command.
Syntax Description
FastEthernet interface-number
GigabitEthernet interface-number
vlan vlan_id
port-channel number
Defaults
This command has no default settings.
Command Modes
Privileged EXEC
Command History Release
12.1(8a)EW
12.1(13)EW
12.1(19)EW
Examples
This example shows how to display queueing information:
Switch# show qos interface fastethernet 6/1
Switch#
Related Commands
qos map cos
show qos
tx-queue
Catalyst4500 Series SwitchCiscoIOS Command Reference—Release 12.2(18)EW
2-370
show qos interface {FastEthernet interface-number | GigabitEthernet interface-number } |
[vlan vlan_id | port-channel number]
Modification
Support for this command was introduced on the Catalyst 4500 series switch.
Added support for extended VLAN addresses.
Display changed to include the Port Trust Device.
QoS is enabled globally
Port QoS is enabled
Administrative Port Trust State: 'dscp'
Operational Port Trust State: 'untrusted'
Port Trust Device:'cisco-phone'
Default DSCP:0 Default CoS:0
Tx-Queue Bandwidth
(bps)
1 31250000
2 31250000
3 31250000
4 31250000
Chapter2 Cisco IOS Commands for the Catalyst 4500 Series Switches
Specifies the Fast Ethernet 802.3 interface.
Specifies the Gigabit Ethernet 802.3z interface.
(Optional) Specifies the VLAN ID; valid values are from 1 to
4094.
(Optional) Specifies the port channel; valid ranges are from
1 to 64.
ShapeRate Priority
(bps)
disabled N/A
disabled N/A
disabled normal
disabled N/A
QueueSize
(packets)
240
240
240
240
78-16201-01