Show Qos Aggregate Policer - Cisco 4500M Command Reference Manual

show qos aggregate policer

show qos aggregate policer
To display QoS aggregate policer information, use the show qos aggregate policer command.
Syntax Description
aggregate_name
Defaults
This command has no default settings.
Command Modes
Privileged EXEC
Command History Release
12.1(8a)EW
Usage Guidelines
The aggregate policer name is case sensitive.
Examples
This example shows the output if you do not enter any keywords:
Switch# show qos aggregate policer
Policer aggr-1
Rate(bps):10000000 Normal-Burst(bytes):1000000
conform-action:transmit exceed-action:policed-dscp-transmit
Policymaps using this policer:
Switch#
Related Commands
qos aggregate-policer
Catalyst4500 Series SwitchCiscoIOS Command Reference—Release 12.2(18)EW
2-368
show qos aggregate policer [aggregate_name]
(Optional) Named aggregate policer.
Modification
Support for this command was introduced on the Catalyst 4500 series switch.
ipp5-policy
Chapter2 Cisco IOS Commands for the Catalyst 4500 Series Switches
78-16201-01