Chapter2
Cisco IOS Commands for the Catalyst 4500 Series Switches
debug psecure
To debug port security, use the debug psecure command. To disable debugging output, use the no form
of this command.
Syntax Description
This command has no arguments or keywords.
Defaults
This command has no default settings.
Command Modes
Privileged EXEC
Command History
Release
12.1(13)EW
Examples
This example shows how to enable all PM debugging:
Switch# debug psecure
Switch#
Related Commands
switchport port-security
78-16201-01
debug psecure
no debug psecure
Modification
Support for this command was introduced on the Catalyst 4500 series switch.
Catalyst4500 Series SwitchCiscoIOS Command Reference—Release 12.2(18)EW
debug psecure
2-63