Debug Vqpc - Cisco 4500M Command Reference Manual

debug vqpc

debug vqpc
To debug VLAN Query Protocol (VQP), use the debug vqpc command. To disable debugging output,
use the no form of this command.
Syntax Description
all
cli
events
learn
packet
Defaults
This command has no default settings.
Command Modes
Privileged EXEC
Command History Release
12.1(13)EW
Examples
This example shows how to enable all PM debugging:
Switch# debug vqpc all
Switch#
Related Commands
vmps reconfirm (privileged EXEC)
Catalyst4500 Series SwitchCiscoIOS Command Reference—Release 12.2(18)EW
2-76
debug vqpc [all | cli | events | learn | packet]
no debug vqpc [all | cli | events | learn | packet]
(Optional) Debugs all VQP events.
(Optional) Debugs VQP command line interface.
(Optional) Debugs VQP events.
(Optional) Debugs VQP address learning.
(Optional) Debugs VQP packets.
Modification
Support for this command was introduced on the Catalyst 4500 series switch.
Chapter2 Cisco IOS Commands for the Catalyst 4500 Series Switches
78-16201-01