Cisco 4500M Command Reference Manual page 154

ip arp inspection vlan logging
Examples
This example shows how to configure ARP inspection on VLAN 1 to log packets on matching against
ACLs with the logging keyword:
Switch# config terminal
Enter configuration commands, one per line.
Switch(config)# ip arp inspection vlan 1 logging acl-match matchlog
Switch(config)# end
Switch# show ip arp inspection vlan 1
Source Mac Validation
Destination Mac Validation : Disabled
IP Address Validation
Vlan
----
Vlan
----
Switch#
Related Commands
arp access-list
show ip arp inspection
Catalyst4500 Series SwitchCiscoIOS Command Reference—Release 12.2(18)EW
2-122
Configuration
-------------
1 Enabled
ACL Logging
-----------
1 Acl-Match
Chapter2 Cisco IOS Commands for the Catalyst 4500 Series Switches
End with CNTL/Z.
: Enabled
: Disabled
Operation ACL Match
--------- ---------
Active
DHCP Logging
------------
Deny
Static ACL
----------
78-16201-01