Vlan Database - Cisco Catalyst 4500 Series Configuration Manual

vlan database

vlan database
To enter VLAN configuration mode, use the vlan database command.
Syntax Description
This command has no arguments or keywords.
Command Default
This command has no default settings.
Command Modes Privileged EXEC mode
Command History Release
12.1(8a)EW
Usage Guidelines
From VLAN configuration mode, you can access the VLAN database editing buffer manipulation
commands, including:
•
•
•
•
•
•
•
•
Examples The following example shows how to enter VLAN configuration mode:
Switch# vlan database
Switch(vlan)#
The following example shows how to exit VLAN configuration mode without applying changes after you
are in VLAN configuration mode:
Switch(vlan)# abort
Aborting....
Switch#
Catalyst 4500 Series Switch Cisco IOS Command Reference—Release XE 3.9.xE and 15.2(5)Ex
2-1168
vlan database
Modification
This command was introduced on the Catalyst 4500 series switch.
abort—Exits mode without applying the changes.
apply—Applies the current changes and bumps the revision number.
exit—Applies the changes, bumps the revision number, and exits VLAN configuration mode.
no—Negates a command or sets its defaults; valid values are vlan and vtp.
reset—Abandons the current changes and rereads the current database.
show—Displays the database information.
vlan—Accesses the subcommands to add, delete, or modify values that are associated with a single
VLAN. For information about the vlan subcommands, see the
command.
vtp—Accesses the subcommands to perform VTP administrative functions. For information about
the vtp subcommands, see the vtp client command.
Chapter 2
vlan (VLAN Database mode)