Cisco 4500M Command Reference Manual page 485

Chapter2 Cisco IOS Commands for the Catalyst 4500 Series Switches
Table2-23 System Action Using duplex and speed Commands (continued)
duplex Command
duplex full
duplex full
This example shows how to configure the interface to transmit at 100 Mbps:
Switch(config-if)# speed 100
Switch(config-if)#
Related Commands
duplex
interface (refer to Cisco IOS documentation)
show controllers (refer to Cisco IOS documentation)
show interfaces (refer to Cisco IOS documentation)
78-16201-01
speed Command Resulting System Action
speed 100 Forces 100 Mbps and full duplex
speed 1000 Forces 1000 Mbps and full duplex
Catalyst4500 Series SwitchCiscoIOS Command Reference—Release 12.2(18)EW
speed
2-453