Cisco 4500M Command Reference Manual page 148

Chapter2 Cisco IOS Commands for the Catalyst 4500 Series Switches
ip arp inspection log-buffer
This example shows how to configure the logging rate to 10 logs per 3 seconds:
Switch(config)# ip arp inspection log-buffer logs 10 interval 3
Switch(config)# end
Switch# show ip arp inspection log
Total Log Buffer Size : 45
Syslog rate : 10 entries per 3 seconds.
No entries in log buffer.
Switch#
Related Commands
arp access-list
show ip arp inspection
Catalyst4500 Series SwitchCiscoIOS Command Reference—Release 12.2(18)EW
2-116
78-16201-01