Reset - Cisco 4500M Command Reference Manual

Chapter2 Cisco IOS Commands for the Catalyst 4500 Series Switches

reset

To leave the proposed new VLAN database but remain in VLAN configuration mode and reset the
proposed new database to be identical to the VLAN database currently implemented, use the reset
command.
Syntax Description
This command has no arguments or keywords.
Defaults
This command has no default settings.
Command Modes
VLAN configuration
Command History Release
12.1(8a)EW
Examples
In this example, the proposed new VLAN database is reset to the current VLAN database:
Switch(vlan-config)# reset
RESET completed.
Switch(vlan-config)#
78-16201-01
reset
Modification
Support for this command was introduced on the Catalyst 4500 series switch.
Catalyst4500 Series SwitchCiscoIOS Command Reference—Release 12.2(18)EW
reset
2-233