qos dscp
qos dscp
To define the default CoS value for an interface
use the no form of this command.
Syntax Description
dscp_value
Defaults
The default DSCP value is 0.
Command Modes
Interface configuration
Command History
Release
12.1(8a)EW
Examples
This example shows how to configure the default QoS DSCP value as 6:
Switch(config-if)# qos dscp 6
Switch(config-if)#
Related Commands
show qos interface
Catalyst4500 Series SwitchCiscoIOS Command Reference—Release 12.2(18)EW
2-218
qos dscp dscp_value
no qos dscp dscp_value
Default DSCP value for the interface; valid values are from 0to 6 3 .
Modification
Support for this command was introduced on the Catalyst 4500 series switch.
Chapter2
Cisco IOS Commands for the Catalyst 4500 Series Switches
use the qos dscp command. To remove a prior entry,
,
78-16201-01